Power · Residential

LED downlights and lighting installation

Good lighting changes how a room feels and what your power bill looks like. We plan the layout with you, then install LED downlights, pendants, strip lighting and outdoor lights that are safe in the ceiling and easy to live with.

  • Licensed and insured
  • Fixed written quotes
  • Compliance certificate supplied
  • Written workmanship warranty

Short answer

Swapping old halogen downlights for LED in Sydney typically costs $80 to $150 per light installed, and new downlights where none exist cost $120 to $220 each. LEDs use around 80% less power than halogens and run much cooler, which also lowers the fire risk in the ceiling space.

We start with how you use each room. Kitchens need even light on the benches, living areas need warmth and dimming, and hallways need just enough to be safe at night. Then we choose the fittings, colour temperature and switching to suit.

Every light we install is IC-rated or fitted with the right clearances to insulation, and dimmable fittings are matched to compatible dimmers so you don’t get flicker or buzzing.

Popular lighting jobs

  • Replacing halogen downlights and transformers with LED
  • New downlight layouts for kitchens and renovations
  • Pendant lights over islands and dining tables
  • LED strip lighting under cabinets, shelves and stairs
  • Dimmers, two-way switching and smart switches
  • Outdoor, garden, deck and security lighting with sensors
Renovated kitchen with LED downlights, black pendant lights and under-cabinet strip lighting

What it costs

Price per light falls as the number of lights rises, because most of the work is access and wiring.

JobTypical priceWhat changes the price
Replace halogen with LED downlight (existing hole)$80–$150 eachFitting quality, ceiling access
New LED downlight with new wiring$120–$220 eachCeiling type, roof space access, number of lights
Pendant light installation$150–$350 eachCeiling height, fitting weight, new point required
Dimmer or smart switch$120–$280 eachDimmer type and compatibility
Outdoor sensor light$180–$380 eachWall type, cable run, weatherproofing
Indicative Sydney prices for 2026, including GST. They’re a guide, not a quote. We confirm a fixed price in writing after seeing the job.

How the job runs

  1. 01Plan the layoutWe mark positions, discuss colour temperature (warm or neutral white) and decide which lights dim.
  2. 02Fixed quoteYou get a written price per room or for the whole job, with fittings listed.
  3. 03InstallWe cut neat holes, run new cable in the ceiling and clean up the dust as we go.
  4. 04Test and hand overWe test every circuit, set dimmers and show you how the switching works.

Safety in the ceiling

Old halogen downlights run hot and have caused ceiling fires where insulation was laid over them. Modern IC-rated LED downlights can be covered by insulation, which keeps your ceiling insulated and safe.

All lighting work is done to AS/NZS 3000. Where we add new circuits or alter existing ones, you receive a Certificate of Compliance for Electrical Work.

FAQ

Common questions

Straight answers to what customers ask us most. Can’t see yours? Call us and talk to an electrician, not a call centre.

Still have a question?0435 552 534
Warm white or cool white?

Most homes suit warm white (about 3000K) in living areas and bedrooms, and neutral white (about 4000K) in kitchens, laundries and garages. We can show you samples before you decide.

Can I reuse my existing downlight holes?

Usually. Most LED downlights fit a 90 mm hole. If the new fitting needs a different size, we’ll tell you before the job starts.

Do LED downlights work with my old dimmer?

Often not well. Older dimmers were made for halogens and can cause flicker. We match dimmers to the LED driver so they work smoothly.

How many downlights does a room need?

It depends on ceiling height and how the room is used. As a rough guide, a 4 m by 4 m living room with a 2.4 m ceiling needs four to six good-quality LEDs. We plan it properly rather than guessing.

Related services

Power

Home automation and smart lighting

Smart lighting, scenes, blinds and automation systems, wired properly and backed by a solid home network.

Power

Ceiling fans

Quiet, secure ceiling fan installation with wall or remote control, including fans with lights.

Power

Power points and circuits

Extra double power points, USB outlets, outdoor weatherproof points and dedicated circuits for big appliances.

Free quotes · Sydney wide

Get a fixed quote from a licensed electrician

Tell us what you need and send a photo or two. We reply within one business day with a clear, fixed price, or call us now to talk it through.

Prefer to talk? Call us0435 552 534Office 02 8360 6167 · Mon–Sat 8am–5pm
  • Licensed and insuredElectricians and registered data cablers
  • Fixed written quoteBefore any work starts, no surprises
  • Certified and guaranteedCompliance certificate and written warranty
  • Clean and tidyWe leave your place as we found it

Request a free quote

Takes about a minute. We reply within one business day.

  • Free, no obligation
  • Reply in 1 business day
  • Never shared

By sending this you agree to our privacy policy.