Power · Residential
Electrical fault finding and repairs
Half the house without power, lights that flicker, a breaker that won’t reset. Electrical faults rarely fix themselves. We test methodically, find the actual cause and fix it, rather than swapping parts and hoping.
- Licensed and insured
- Fixed written quotes
- Compliance certificate supplied
- Written workmanship warranty
Short answer
Most electrical faults in Sydney homes are found and fixed within one to two hours. Expect a call-out and first hour of about $150 to $250, then a set rate for further time. Common causes are failed appliances, water in outdoor fittings, loose connections and old wiring.
We start with what you’ve noticed: what stopped working, when, and whether anything changed. Then we test circuits and appliances with proper instruments to find the fault rather than guessing.
If you smell burning, see scorch marks or hear buzzing from the switchboard or an outlet, switch off the main switch if it’s safe to do so and call us.
Faults we fix every week
- Safety switch or breaker trips and won’t reset
- Power points or lights not working in part of the house
- Lights that flicker or dim
- Warm or discoloured outlets and switches
- Buzzing from the switchboard
- Electric shocks or tingles from taps, appliances or metalwork
What it costs
We tell you the rates before we start, and agree further work with you before doing it.
| Job | Typical price | What changes the price |
|---|---|---|
| Call-out and first hour | $150–$250 | Time of day, location |
| Each additional half hour | $55–$90 | Complexity of the fault |
| Typical repair parts (outlet, switch, breaker) | $20–$150 | Part type |
How the job runs
- 01Describe the faultA few questions on the phone often point us straight to the problem.
- 02TestWe test insulation, voltage and continuity to isolate the faulty circuit, fitting or appliance.
- 03Agree the fixWe explain what we found and the cost to fix it before we go ahead.
- 04Repair and testWe repair it and retest the circuit so you know it’s safe.
Safety first
A tingle from a tap, appliance or metal surface can mean a serious earthing fault. Stop using it and call a licensed electrician straight away.
If the fault is on the street side of your meter, such as a whole-street outage or damaged service wires, contact your electricity network. For most of inner and southern Sydney that’s Ausgrid.
FAQ
Common questions
Straight answers to what customers ask us most. Can’t see yours? Call us and talk to an electrician, not a call centre.
My power’s out. Is it me or the street?
If your neighbours are also out, it’s likely the network. Check your switchboard: if the main switch and breakers are on and you still have no power, call your network provider.
Can you come today?
We keep time free for urgent faults during business hours. Call us and we’ll tell you honestly how soon we can be there.
Will you fix it on the first visit?
Most faults, yes. We carry common parts. Some repairs need ordered parts and a quick second visit.
Related services
Power
Safety switches and RCDs
Install, test and fault-find safety switches (RCDs and RCBOs) so a fault cuts power before it can hurt anyone.
Power
Switchboard upgrades
Replace ceramic fuses and tired boards with modern circuit breakers and safety switches on every circuit.
Power
House rewiring
Replace old rubber, cloth-insulated or overloaded wiring, from single circuits to full house rewires.
Free quotes · Sydney wide
Get a fixed quote from a licensed electrician
Tell us what you need and send a photo or two. We reply within one business day with a clear, fixed price, or call us now to talk it through.
Prefer to talk? Call us0435 552 534Office 02 8360 6167 · Mon–Sat 8am–5pm- Licensed and insuredElectricians and registered data cablers
- Fixed written quoteBefore any work starts, no surprises
- Certified and guaranteedCompliance certificate and written warranty
- Clean and tidyWe leave your place as we found it