Data and security
Cat6 and Cat6A network cabling
Wi-Fi is convenient, but a cable is faster and more reliable. We install structured Cat6 and Cat6A cabling for homes and offices, label every point and give you test results.
- Registered data cablers
- Every point tested and labelled
- Licensed electricians too
- Fixed written quotes
Short answer
Cat6 cable supports 1 Gbps to 100 metres and 10 Gbps over shorter runs of about 55 metres. Cat6A supports 10 Gbps to the full 100 metres. A data point in Sydney typically costs $180 to $300 each in a home, and less per point for larger office jobs. Data cabling must be installed by an ACMA-registered cabler.
For homes, wired points to the TV, home office and Wi-Fi access points make the whole network better. For offices, structured cabling to a patch panel and rack is the foundation everything else runs on.
We terminate every point, test it with a certifying tester, label both ends and hand over a cable schedule.
When cabling makes sense
- Video calls drop or stutter on Wi-Fi
- Gaming, streaming or large file transfers are slow
- You’re renovating or building, and walls are open
- New office or desk layout
- Old Cat5 cabling that can’t keep up
Cat5e, Cat6 or Cat6A?
All three carry 1 Gbps to 100 metres. The difference is 10 Gbps: Cat6 manages it to about 55 metres, Cat6A to the full 100 metres. For most homes Cat6 is plenty. For offices and the latest Wi-Fi, choose Cat6A.
What it costs
Cable runs and access matter more than the outlet.
| Job | Typical price | What changes the price |
|---|---|---|
| Single Cat6 data point (home) | $180–$300 | Cable run, wall type |
| Cat6 data point at volume (office) | $150–$250 | Quantity, ceiling access |
| Cat6A data point | $220–$350 | Cable run, termination |
| Patch panel and small wall rack | $450–$1,200 | Rack size, number of ports |
How the job runs
- 01Plan points and pathsWe mark outlets, the rack location and cable routes.
- 02InstallCable is run, supported and kept clear of power cables as the standard requires.
- 03Terminate and certifyEach link is terminated and tested.
- 04Label and documentBoth ends labelled, with a cable schedule and results.
Registered and to standard
In Australia, customer cabling connected to a telecommunications network must be installed by a cabler registered with an ACMA-accredited registrar, and must meet the Wiring Rules for telecommunications (AS/CA S009). Our cablers are registered and our work is certified.
FAQ
Common questions
Straight answers to what customers ask us most. Can’t see yours? Call us and talk to an electrician, not a call centre.
Cat6 or Cat6A?
Cat6 is right for most homes and small offices. Cat6A is worth it for long runs, Wi-Fi 6E and 7 access points, and offices planning for 10 Gbps.
Can you cable an existing home without damaging walls?
Usually. We use roof space, underfloor, wall cavities and existing paths. Where a wall is solid brick we’ll discuss neat surface options.
Do you supply test results?
Yes. Every link is tested and the results are supplied with the cable schedule.
Related services
Data and security
Comms rooms and racks
Tidy comms cupboards and racks with patching, power and cable management that IT teams like to work in.
Data and security
Wi-Fi access points
Ceiling-mounted Wi-Fi access points on cabled backhaul for full coverage without dead zones.
Power
Office fit-outs
Power, lighting and data for office fit-outs and refits, delivered by one team on one program.
Free quotes · Sydney wide
Get a fixed quote from a licensed electrician
Tell us what you need and send a photo or two. We reply within one business day with a clear, fixed price, or call us now to talk it through.
Prefer to talk? Call us0435 552 534Office 02 8360 6167 · Mon–Sat 8am–5pm- Licensed and insuredElectricians and registered data cablers
- Fixed written quoteBefore any work starts, no surprises
- Certified and guaranteedCompliance certificate and written warranty
- Clean and tidyWe leave your place as we found it